DIY Kit Voice Control Level Indicating LED Red/Blue/Green Electronic Production

Description

Home
Arduino
Module
Sensor
Chips
About Us
Product description:
Three sections of 10-point voice level indicator kit (blue, green, red 5mm Highlight LED)
Kits Model: SAL-30
Operating voltage :9-15V
PCB Size: 160mm * Width 42mm
Features:
Power Voltage：9V--15V；
PCB Dimensions：160mm*42mm
Principle of Circuits:
The circuit is mainly composed by Power Circuit, Audio Amplifier Circuit, Frequency Dividing Circuit and LED Driver Circuit.
1. Power Circuit: The power output voltage is 9V--15V. D1 can avoid the demage of three terminal regulator when the power polarity is connected in a wrong way. After the C4's filtering , L7806 three terminal regulator will provide the whole circuit with a stable voltage of 6V.
2. Audio Amplifier Circuit: Electret microphone MK1 transfers the obtained sound to electric signal which will be amplifed twice by Q1 and Q2. At this time, UR1 can adjust the size of Q2 signal in order to adjust the sensitivity of the whole circuit.
3.Frequency Dividing Circuit：Three frequency dividing circuits is added to indicate the electrical level on the different frequency, as it's featured with three sections of LED indicator in a seperate way. VR2、VR3 and VR4 are used for adjusting the sensitivity of LED indicator on the different frequency. The sound signal from three different frequency can be distinguished according to the different capability of C6、C10 and C11. Q4、Q5 and Q18 collectors can obtain three different frequency and the voltages after dividing and amplifying by diode and transistor. The level of voltage depends on the size of the sound from outside.
4.LED Driver Circuit：There are 9 pieces of 1N4148 diode in each frequency. If the sound is louder, the higher voltage will be obtained by Q4、Q5 and Q18 connector and more 1N4148 start work. Then more LEDs can light.
Components List
Circuit Diagram
Buyer show:
Package Included:
1PCS*Voice Control Level Indicating LED Red/Blue/Green Electronic Production DIY Kit
Payment
Shipping
Refund
Payment
We accept PayPal only.
But we only
Accept
your
Ebay Address
,Please Make sure it's 100% right.
Payment must be received in 5 business days of auction closing.
Please leave note for your special request (e.g. Colors or Size) in PayPal when you pay the order.
Any special request cannot be accepted after 24 hours of payment, because most of orders will be processed instantly and same day dispatched.
Shipping
Fill your shipping info
Refund
All package need to
wait 30 days
(US only n
eed 7-10 days)
,
Please take care it.Less than 30 days,we can't take a refund
.
If the item is defect when you receive it or you are not satisfied with it, please return it within 14 days for a replacement or money back. But the items must be back in factory condition. Please contact us and double check the return address before you return it.
If is item is defective in 12 months, you can return it to us. We will send you a new replacement after receiving the defective item.