Damp Seal White Paint One Coat / Spray Permanently Covers & Blocks 250ml -2.5L

Description

Ronseal One Coat Damp Seal White Paint Permanently Covers & Blocks - 250,400,750ml And 2.5L
Dispatched sameday where payment has cleared by 1pm
VAT receipts can be provided upon request
Ronseal One Coat Damp Seal
Ronseal One Coat Damp Seal Can Be Applied Straight Onto Damp. It'll Seal It, Permanently Cover And Damp Stains And Stop It Damaging Your Paint. Can be used on damp surfaces. Lets trapped moisture escape. Stops your paint flaking or peeling paint over in 4 hours.
Ronseal Damp Spray 400ML:
Permanently blocks damp stains and prevents them from damaging the topcoat. Can be applied directly to damp surfaces. Requires 2-3 coats, and dries in 10 minutes. Leaves a smooth white finish ready for painting or wallpapering.
Before Use:
Remove any wallpaper with a scraper and sand off any loose or flaking paint. Make sure the area you are painting is clean.
You can paint onto damp surfaces, just make sure they're not dripping wet.
Using Your Damp Seal Give the paint a really good stir, then use a roller or brush to put it on. If you're covering a small damp patch, make sure you are painting at least 30cm around the area. It'll be touch dry in 2 hours. After 4 hours it'll be ready to paint or wallpaper over.
Features:
- Ready to paint over in 4 hours
- Permanently Blocks damp
- Protects Paintwork
- No preparation needed
Product Safety
Danger
Causes serious eye irritation.
Flammable liquid and vapour.
May cause an allergic skin reaction.
May cause drowsiness or dizziness.
Repeated exposure may cause skin dryness or cracking.
Ronseal One Coat Damp Seal Can Be Applied Straight Onto Damp. It'll Seal It, Permanently Cover And Damp Stains And Stop It Damaging Your Paint. Can be used on damp surfaces. Lets trapped moisture escape. Stops your paint flaking or peeling paint over in 4 hours. Permanently blocks damp stains and prevents them from damaging the topcoat. Can be applied directly to damp surfaces. Requires 2-3 coats, and dries in 10 minutes. Leaves a smooth white finish ready for painting or wallpapering. Remove any wallpaper with a scraper and sand off any loose or flaking paint. Make sure the area you are painting is clean.   Using Your Damp Seal Give the paint a really good stir, then use a roller or brush to put it on. If you're covering a small damp patch, make sure you are painting at least 30cm around