Camping Stove in case of Emergency time. "Airwood BM" (similar to Solo )

Description

"Airwood BM Stove" production from Europe.  Handmade and good quality.  Waiting time in stock
1 - 30 days.
- a light weight;
- only 350 grams! including case;
- free fuel - chips, twigs, cones, brushwood, etc. are used;
- powerful - you can cook up to 4 liters!;
- unpretentiousness - after kindling with dry fuel, you can use raw fuel;
- efficient energy consumption from accumulators - the air injection unit can work up to 24 hours from one set of accumulators;
- if necessary, it can work without an air injection unit;
- safe - you can carry it in your luggage on the plane;
- handmade - each product has a piece of our heart!
Operating principle.
The stove has efficiency factor (combustion efficiency of fuel) up to 80% (in contrast to the usual 5-7% efficiency of a camp fire). This is due to the fact the smoke from the wood has about 90% of unburned particles because of the lack of an oxygen. With injection of a fresh heated air in such smoke, such minor particles are burned down. On this principle of operation this portable stove is actually built. Cold air from the block air injection falls into a hole in the bottom of the outer wall of the stove. Some of the air is pumped into the bottom holes in the bottom of the combustion chamber under the action of a fan. The other portion of air rushes upwards, where it warms up and goes through the holes and gets into the top of the combustion chamber of the stove.
Pic.2. Details of the stove.
Where the air goes out the flames are formed due to the re-ignition of smoke, enriched by oxygen. The flame is very intensive.
Thanks to the forced air injection block, the stove provides powerful heating, even using a little raw firewood after reaching the working mode (1-2 minutes after ignition in "High speed" mode). Due to this effect - the stove provides heat allowing to cook (soup, porridge, tea and etc.) volume up to 4 liters.
As a wood you can use branches, wood chips, bumps and any other available dry solid fuel. But remember that it is although and solid fuel, but it still burner, not a BBQ. Cooking is done by fire on it, not by heat only - it means that the use peat, coal or other materials which do not form the flame during combustion as fuel, is inappropriate in this stove.
The stove is made of stainless steel and consist of body, forced air injection block and a stand for camp cookware. The body consists of a combustion chamber and the outer casing with side opening and fastening for the air injection block.
Air injection block ("blower") into the combustion chamber is equipped with three-position switch with the following modes:
1. The average position - "Off"
2. Upper position - "High speed" (~ 3000 rpm) - for instant ignition.
3. Lower position - "Low speed" (~ 2000 rpm. / Min.) - to maintain a high
flame.
The fan unit is powered by two AAA 3 Volt batteries.
Equipment:
- furnace body assembled with a combustion chamber;
- sturdy dish support;
- forced air supply unit powered by two AAA batteries (batteries are not included in the package);
- cover made of lightweight waterproof fabric;
- you can use any wood, pinch, cones ...
- operate batteries if you need to use turbo mode
!!! Returns will not be accepted after use in fire !!!